SUBJECT: NOISE INTERFERENCE ON WIRELESS MIC

DESCRIPTION

When the camcorder is connected to the UWP-V1 wireless system and UTX-H2 microphone, and LCD Brightness is set to H, high-frequency noise may be audible in the audio channel. Noise does not occur with Brightness set to L or M.

To correct the noise, replace the LCD assembly with a new suffix -B LCD assembly.

Note:For replacement details, refer to the service manual, “LCD Assembly.”

PARTS REQUIRED

Part No.	Description	Qty.
A-1899-038-B	LCD Assembly	1

ORDERING INFORMATION

To order parts online, go to: www.sony.com/servicesplus. For service or parts ordering assistance, refer to the following document, which lists all contact telephone numbers:

Technical Bulletin 00-1999-000