MODEL



SERIAL NO :  ALL



Italicized information in green applies to customers outside the United States.

Professional Audio Products

Technical Bulletin 10-2014-024


SUBJECT:  LCD MONITOR OF CAMCORDER CANNOT BE CLOSED WITH TUNER ATTACHED

DESCRIPTION

When the URX- P2 tuner is installed to a camcorder (such as PMW-100) that has the LCD monitor attached to the handle, the monitor cannot be freely opened and closed. (See Figure 1.)

URX-P2 tuner installed to a camcorder with LCD monitor attached to handle, monitor cannot be freely opened and closed.

Figure 1

To prevent interference between the tuner and LCD monitor, replace the shoe mount adapter assembly supplied with URX-P2 with a new shoe mount adapter (L), which is available as a service part. (See Figure 2.)

prevent interference between tuner and LCD monitor, replace shoe mount adapter assembly supplied URX-P2 with new shoe mount adapter.

Figure 2

PARTS REQUIRED

Part No. Description Qty.
4-528-581-01 Shoe Mount Adapter (L) 1
4-456-761-01 Front Protector Panel 1

ORDERING INFORMATION


To order parts online, go to: www.sony.com/servicesplus. For service or parts ordering assistance, refer to the following document, which lists all contact telephone numbers:

Technical Bulletin 00-1999-000


REPLACEMENT PROCEDURE

1. Remove the shoe holder (two +KM2×6 screws) from the former shoe mount adapter assembly. (See Figure 3.)

remove shoe holder-two +KM2×6 screws – from the former shoe mount adapter assembly.

Figure 3

2. Attach the removed shoe holder to the new shoe mount adapter (L) with the same screws, using a tightening torque of 0.2 N•m. (See Figure 4.)

attach removed shoe holder to new shoe mount adapter with same screws, using tightening torque of 0.2 N*m.

Figure 4

3. Remove the belt clip holder from URX-P2 (by shifting side-to-side), and reattach the holder upside down to URX-P2. (See Figure 5.)

remove belt clip holder from URX-P2, and reattach holder upside down to URX-P2.

Figure 5

4. Insert the shoe mount adapter (L) between the belt clip holder and the bottom of the tuner, and push to affix the belt clip holder until it clicks. (See Figure 6.)

insert shoe mount adapter between belt clip holder and tuner bottom, push to affix the belt clip holder until it clicks

Figure 6

Call
Mobile
(818) 244-4440
Toll Free: (800) 255-5045