Broadcast Products
Technical Bulletin 20-2008-119
SUBJECT: FRACTURED BELT HOOK ON HANDLE
DESCRIPTION
The belt hook on the handle may become fractured under the following conditions. (See Figure 1.)
An excessive shock (approximately 100G or more) is applied to the belt hook.
The camera is carrying an extra load totaling approximately 10 kg or more, and the total load is applied to the belt hook for an extended period of time.
Inspect the belt hook as follows, and replace the handle sub assembly if necessary.
Figure 1
PARTS REQUIRED
| Part No. |
Description |
Qty. |
| A-8279-880-M |
Handle Sub Assembly |
1 |
ORDERING INFORMATION
To order parts online, go to:http://www.sony.com/servicesplus. For service or parts ordering assistance, refer to the following document, which lists all contact telephone numbers:
Technical Bulletin 00-1999-000
MODIFICATION PROCEDURE
1.Inspect the belt hook shaft (two pieces) for wear and abrasion. (See Figure 2.)
Figure 2
2.If the diameter of the shaft is 5.2 mm or less, replace the handle sub assembly with a new one. (See Figure 3.)
NOTE: The diameter of the shaft when shipped from the factory is 5.9 mm.
For replacement details, refer to the maintenance manual: Main Menu > Search for Parts Information > List of Parts Information > 164. Removing/Reinstalling Handle.
Figure 3
