Camcorder Repair

Sony XDS-PD2000

Related Models:   XDS-PD2000C 
  • FREE Estimaes
  • All repairs and Services are done in-house to insure quick turnaround time
  • Most repairs are guaranteed for six months
Sony XDS-PD2000 repair, firmware upgrade, SDI port, no power, no audio, liquid salt sand damage, front glass replacement, firewire, rejecting media, physical damage, broken lens, Technical-Service Bulletins - tek media group

Sony Camcorder most requested repairs

  • No Power
  • Soft back focus
  • Battery does not charge
  • Dust inside the lens
  • SDI port is not working
  • SDI port yanked out or damaged
  • Dropped physical damage
  • liquid damage
  • Salt sand dust inside the camera
  • LCD display not working
  • Iris blades stuck

Self Diagnosis Error Codes

Before you send or bring the camera to us for a repair: Your camcorder has a self-diagnosis display function. This condition displays your camcorders condition as a five digit code (combination of letters, numbers and figures) on the LCD screen display windows or on the view finder. If the five digit code is displayed. Check the error code chart, the last two digits indicated by □□ will differ depending on the state of your camcorder. If you are experiencing following error codes on your Sony camera or deck, most likely your camera or deck hardware has failed and needs an immediate attention. Call chat or email us to find a quick resolutions.

Technical/Service Bulletins


  • Version 2.72 (10/3/2016)
  • Connector for EX Card (Guide Unit) (9/5/2016)
  • Loader Assembly (2/22/2016)
  • SD01 Media Adapter Stuck in Card Slot when Inserted Backward (10/26/2015)
  • Manual Eject Malfunction (10/12/2015)
  • Version 2.67 (6/29/2015)
  • Version 2.65 (4/27/2015)
  • Dial Cover (4/6/2015)
  • Version 2.63 (1/5/2015)
  • ON in High Temperatures (9/22/2014)
  • Plug Holder of Power Cable Cannot Be Locked to Unit (9/22/2014)
  • Version 2.44 (9/8/2014)
  • Boot Failure (5/26/2014)
  • Version 2.51 (5/5/2014)
  • Version 2.53 (5/5/2014)
  • Error Codes, Warnings, and Alarm Messages (4/21/2014)
  • "EXCHG BATT!" Warning (3/17/2014)
  • Version 2.45 (3/3/2014)
  • Version 2.01 (12/23/2013)
  • Discontinuous Video or Audio with XDCAM Playback (12/23/2013)
  • 1152 Board (11/25/2013)
  • Note When Replacing Loader Assembly (10/21/2013)
  • 818/811) (10/21/2013)
  • Version 2.33 (7/15/2013)
  • Version 2.31 (5/6/2013)
  • 1) Version 2.0.1 (5/6/2013)
  • Version 2.30 (3/18/2013)
  • Power ON/OFF Disabled from Recessed Power Switch on Front Panel (3/4/2013)
  • XDCAM Software Availability (2/18/2013)
  • Version 2.14 (2/11/2013)
  • Version 1.29 (1/7/2013)
  • 104 (1/7/2013)
  • Version 2.03 (1/7/2013)
  • E80 After Checking or Adjusting Skew (8/20/2012)
  • 1152 Board (8/6/2012)
  • 811 (6/11/2012)
  • Version 1.26 (5/21/2012)
  • Version 1.24 (5/7/2012)
  • Version 1.13 (3/26/2012)
  • Version 1.14 (3/26/2012)
  • Replacement Cycle in Periodic Replacement Parts List (1/16/2012)
  • Delete Accelerate Item in Drive Maintenance Menu (1/9/2012)
  • Cartridge or Disc Cannot Be Ejected (1/9/2012)
Call
Mobile
(818) 244-4440
Toll Free: (800) 255-5045