Camcorder Repair

Sony PMW-EX1R/1

Related Models:   PMW-EX1R 
  • FREE Estimaes
  • All repairs and Services are done in-house to insure quick turnaround time
  • Most repairs are guaranteed for six months
Sony PMW-EX1R/1 repair, firmware upgrade, SDI port, no power, no audio, liquid salt sand damage, front glass replacement, firewire, rejecting media, physical damage, broken lens, Technical-Service Bulletins - tek media group

Sony Camcorder most requested repairs

  • No Power
  • Soft back focus
  • Battery does not charge
  • Dust inside the lens
  • SDI port is not working
  • SDI port yanked out or damaged
  • Dropped physical damage
  • liquid damage
  • Salt sand dust inside the camera
  • LCD display not working
  • Iris blades stuck

Self Diagnosis Error Codes

Before you send or bring the camera to us for a repair: Your camcorder has a self-diagnosis display function. This condition displays your camcorders condition as a five digit code (combination of letters, numbers and figures) on the LCD screen display windows or on the view finder. If the five digit code is displayed. Check the error code chart, the last two digits indicated by □□ will differ depending on the state of your camcorder. If you are experiencing following error codes on your Sony camera or deck, most likely your camera or deck hardware has failed and needs an immediate attention. Call chat or email us to find a quick resolutions.

  • 15030 System error
  • 17001 Abnormality in the Media ID data in the EEPROM
  • 17002 The image processor block does not start up.
  • 17003 The display block does not start up
  • 17004 The media block does not start up
  • 17005 Abnormality in the start-up process of the image processor block
  • 17006 Abnormality in the start-up process of the display block
  • 17007 Abnormality in the start-up process of the media block
  • 17014 Abnormality in lens communication
  • 17015 Abnormality in the media block
  • 17016 Abnormality in obtaining the lens switch
  • 17017 Internal error in the media block
  • 4XXXX Internal error in the media block

Technical/Service Bulletins


  • MEAD-MS01/MEAD-SD01 Media Adapter Stuck in Card Slot when Inserted Backward (10/26/2015)
  • Software Upgrade - Version 1.31 (3/3/2014)
  • Manual Correction - Pin Assignment for Lens Remote Connector (8P Female) (3/3/2014)
  • Software Upgrade - Content Browser (CTB-1) Version 2.0.1 (5/6/2013)
  • XDCAM Software Availability (2/18/2013)
  • Parts Registration - DPR-311 Board (1/21/2013)
  • Software Upgrade - Version 1.30 (6/25/2012)
  • Gamma Setting Indicated on XDCAM EX Clip Browser Differs From Setting of Camcorder (2/20/2012)
  • Manual Correction - Clip Name Disp Settings (9/26/2011)
  • Software Upgrade - Version 1.20 (8/29/2011)
  • Software Upgrade - PDZK-MA1 Plug-In For XDCAM EX Version 1.2 (8/22/2011)
  • Length of Screw Securing Rear Accessory Shoe (8/15/2011)
  • Blue Screen With Windows XP (5/16/2011)
  • How to Eject MEAD-MS01 and MEAD_SD01 When Inserted Incorrectly (5/16/2011)
  • Parts Registration - Hood (G) Foot (5/3/2010)
  • Screws Attachng Tripod Washer in Bottom Cover (12/19/2016)
  • Connector for EX Card (Guide Unit) (9/5/2016)
  • SD01 Media Adapter Stuck in Card Slot when Inserted Backward (10/26/2015)
  • Version 1.31 (3/3/2014)
  • Pin Assignment for Lens Remote Connector (8P Female) (3/3/2014)
  • 1) Version 2.0.1 (5/6/2013)
  • 311 Board (1/21/2013)
  • Version 1.30 (6/25/2012)
  • Clip Name Disp Settings (9/26/2011)
  • Version 1.20 (8/29/2011)
  • In For XDCAM EX Version 1.2 (8/22/2011)
  • MS01 and MEAD_SD01 When Inserted Incorrectly (5/16/2011)
  • Hood (G) Foot (5/3/2010)
Call
Mobile
(818) 244-4440
Toll Free: (800) 255-5045