Camcorder Repair

Sony PMW-300K1--U

Related Models:   PMW-300K1 ; PMW-300K1--C 
  • FREE Estimaes
  • All repairs and Services are done in-house to insure quick turnaround time
  • Most repairs are guaranteed for six months
Sony PMW-300K1--U repair, firmware upgrade, SDI port, no power, no audio, liquid salt sand damage, front glass replacement, firewire, rejecting media, physical damage, broken lens, Technical-Service Bulletins - tek media group

Sony Camcorder most requested repairs

  • No Power
  • Soft back focus
  • Battery does not charge
  • Dust inside the lens
  • SDI port is not working
  • SDI port yanked out or damaged
  • Dropped physical damage
  • liquid damage
  • Salt sand dust inside the camera
  • LCD display not working
  • Iris blades stuck
Sony XDCAM PMW 200 Lens Front Element in stock for repair and sale
Sony XDCAM PMW 200, 100, 150, 300 Lens Damage
Save up to 70% lens on repaires

Cameras dropped customer abuse water damage no problem PMW 200 / 100 / 150 / 300


Front Element - glass is now available

Most requested repairs


Camcorder

  • NO power
  • Liquid Damage
  • SDI / HDMI / Video out 
  •  port physically damaged
  • SDI / HDMI / Video physically 
  • not damaged however not working
  • I-LINK not working
  • Video Signal for LCD or Viewfinder is out
  • No Audio
  • Camera not reading flash card
  • Battery Error
  • Camera not reading the memeory Card
  • Position of Speaker Screen Changed
  • Removed Parts for Heat Dissipation, Waterproofing, and Excess Radiation
  • Battery Alarm Displayed before Battery Runs Low
  • Software Upgrade - Version 1.32 (6/2/2014)
  • Uneven Areas of Brightness on LCD (12/23/2013
  • Ghosting or Flaring
  • Damaged Outside Panel Where Grip Attaches
  • LCD Monitor of Camcorder Cannot Be Closed With Tuner Attached

Lens

  • Zoom In and out issues
  • Sand or salt Inside the lens
  • Lens front element (Scratches or Damaged)

Self Diagnosis Error Codes

Before you send or bring the camera to us for a repair: Your camcorder has a self-diagnosis display function. This condition displays your camcorders condition as a five digit code (combination of letters, numbers and figures) on the LCD screen display windows or on the view finder. If the five digit code is displayed. Check the error code chart, the last two digits indicated by □□ will differ depending on the state of your camcorder. If you are experiencing following error codes on your Sony camera or deck, most likely your camera or deck hardware has failed and needs an immediate attention. Call chat or email us to find a quick resolutions.

  • E-15030 System error
  • E-17001 Check EEPROM data
  • E-17002 The Image processor block does not start
  • E-17003 The display block does not start
  • E-17004 The media block does not start
  • E-17005 The image processor block starts processing in issues
  • E-17006 The display block startup processing is abnormal
  • E-17007 The media block not functioning properly
  • E-17014 No communication between camera and the lens
  • E-17015 Media block issues
  • E-17016 Lens not working
  • E-17017 Internal  hardware errors
  • E-4xxxx Internal  hardware errors

Technical/Service Bulletins


  • Version 1.51 (10/3/2016)
  • Spacer to Prevent Deformation when Attaching AU Volume (9/19/2016)
  • Connector for EX Card (Guide Unit) (9/5/2016)
  • Eyecup (7/18/2016)
  • Version 1.50 (7/18/2016)
  • XLR Selection Switch (7/18/2016)
  • Mount Ring (12/7/2015)
  • SD01 Media Adapter Stuck in Card Slot when Inserted Backward (10/26/2015)
  • Version 1.42 (7/13/2015)
  • Version 1.41 (6/15/2015)
  • Part Number for Prism Block Assembly and Screw (5/4/2015)
  • Version 1.40 (3/9/2015)
  • Handle Microphone Case Assembly and Top Panel Assembly (1/19/2015)
  • Lens Holder (Rear) Sub Assembly (11/24/2014)
  • Version 1.30 (11/24/2014)
  • Additional Parts to Prevent Pinching of Harness on Outside Panel (11/24/2014)
  • Note When Replacing Shaft Holder (U) (11/10/2014)
  • Shoe Shaft Assembly and Rock Ring (11/10/2014)
  • Servicing Camcorders With and Without ND Stopper Attached to Handle Assembly (6/30/2014)
  • Version 1.20 (6/9/2014)
  • Version 1.12 (5/26/2014)
  • Removing VF Cover Correctly (3/3/2014)
phoneIcon
(818) 244-4440
Toll Free: (800) 255-5045