Camcorder Repair

Sony PMW-100--C

Related Models:   PMW-100 
  • FREE Estimaes
  • All repairs and Services are done in-house to insure quick turnaround time
  • Most repairs are guaranteed for six months
Sony PMW-100--C repair, firmware upgrade, SDI port, no power, no audio, liquid salt sand damage, front glass replacement, firewire, rejecting media, physical damage, broken lens, Technical-Service Bulletins - tek media group

Sony Camcorder most requested repairs

  • No Power
  • Soft back focus
  • Battery does not charge
  • Dust inside the lens
  • SDI port is not working
  • SDI port yanked out or damaged
  • Dropped physical damage
  • liquid damage
  • Salt sand dust inside the camera
  • LCD display not working
  • Iris blades stuck

Self Diagnosis Error Codes

Before you send or bring the camera to us for a repair: Your camcorder has a self-diagnosis display function. This condition displays your camcorders condition as a five digit code (combination of letters, numbers and figures) on the LCD screen display windows or on the view finder. If the five digit code is displayed. Check the error code chart, the last two digits indicated by □□ will differ depending on the state of your camcorder. If you are experiencing following error codes on your Sony camera or deck, most likely your camera or deck hardware has failed and needs an immediate attention. Call chat or email us to find a quick resolutions.

  • E-15030 System error
  • E-17001 The media ID data in the EEPROM is abnormal
  • E-17002 The image processor block does not start
  • E-17003 The display block does not start
  • E-17004 The media block does not start
  • E-17005 The image processor block startup processing is abnormal
  • E-17006 The display block startup processing is abnormal
  • E-17007 The media block startup processing is abnormal
  • E-17014 The lens communication is abnormal
  • E-17015 The media block is abnormal
  • E-17016 The lens switch status cannot be acquired
  • E-17017 Media block internal error
  • E-4XXXX Media block internal error

Technical/Service Bulletins


  • MEAD-MS01/MEAD-SD01 Media Adapter Stuck in Card Slot when Inserted Backward (10/26/2015)
  • Parts Registration - Handle (10/26/2015)
  • Position of Speaker Screen Changed (10/6/2014)
  • Parts Registration - Slide Switch on AXM-46 Board (6/30/2014)
  • LCD Monitor of Camcorder Cannot Be Closed With Tuner Attached (5/26/2014)
  • Parts Registration - RE-299 Board and RE-300 Board (5/26/2014)
  • Software Upgrade - Version 1.31 (5/26/2014)
  • Software Upgrade - SxS UDF Driver Version 2.1.1 for Mac (3/3/2014)
  • Noise Interference on Wireless Mic (3/3/2014)
  • Manual Correction - Part Included with Rear Panel Assembly (11/11/2013)
  • Software Upgrade - SxS UDF Driver Version 2.1.0 (9/9/2013)
  • Changing Default Input Reference Level for EXT MIC IN AUTO Mode (8/26/2013)
  • Software Upgrade - Content Browser (CTB-1) Version 2.0.1 (5/6/2013)
  • XDCAM Software Availability (2/18/2013)
  • Manual Correction - Component Parts of Lens No Longer Available (1/21/2013)
  • Software Upgrade - Version 1.10 (12/10/2012)
  • Software Upgrade - SxS UDF Driver Version 2.0.0 (12/3/2012)
  • Software Upgrade - SxS UDF Driver Windows Version 2.0.1 (8/6/2012)
  • Spacer to Prevent Deformation when Attaching AU Volume (9/19/2016)
  • Connector for EX Card (Guide Unit) (9/5/2016)
  • XLR Selection Switch (7/18/2016)
  • SD01 Media Adapter Stuck in Card Slot when Inserted Backward (10/26/2015)
  • Handle (10/26/2015)
  • 46 Board (6/30/2014)
  • 300 Board (5/26/2014)
  • Version 1.31 (5/26/2014)
  • SxS UDF Driver Version 2.1.1 for Mac (3/3/2014)
  • Part Included with Rear Panel Assembly (11/11/2013)
  • SxS UDF Driver Version 2.1.0 (9/9/2013)
  • 1) Version 2.0.1 (5/6/2013)
  • Component Parts of Lens No Longer Available (1/21/2013)
  • Version 1.10 (12/10/2012)
  • SxS UDF Driver Version 2.0.0 (12/3/2012)
  • SxS UDF Driver Windows Version 2.0.1 (8/6/2012)
phoneIcon
(818) 244-4440
Toll Free: (800) 255-5045