Sony Camera & Deck Repair

Skip Navigation LinksHome > Camcorder - Camera and Deck Repair > Sony Camera and Deck Repair

Camcorder Repair

Sony PDWF355

Related Models:   PDWF355L ; PDW-F355L 
  • FREE Estimaes
  • All repairs and Services are done in-house to insure quick turnaround time
  • Most repairs are guaranteed for six months
Sony PDWF355 repair, firmware upgrade, SDI port, no power, no audio, liquid salt sand damage, front glass replacement, firewire, rejecting media, physical damage, broken lens, Technical-Service Bulletins - tek media group

Sony Camcorder most requested repairs

  • No Power
  • Soft back focus
  • Battery does not charge
  • Dust inside the lens
  • SDI port is not working
  • SDI port yanked out or damaged
  • Dropped physical damage
  • liquid damage
  • Salt sand dust inside the camera
  • LCD display not working
  • Iris blades stuck

PMW

Self Diagnosis Error Codes

Before you send or bring the camera to us for a repair: Your camcorder has a self-diagnosis display function. This condition displays your camcorders condition as a five digit code (combination of letters, numbers and figures) on the LCD screen display windows or on the view finder. If the five digit code is displayed. Check the error code chart, the last two digits indicated by □□ will differ depending on the state of your camcorder. If you are experiencing following error codes on your Sony camera or deck, most likely your camera or deck hardware has failed and needs an immediate attention. Call chat or email us to find a quick resolutions.

Technical/Service Bulletins

  • Loose Shoulder Belt (6/30/2014)
  • Software Upgrade - PDW-680 Version 1.05; PDW-700/F800 Version 1.86; PDW-F335/F355 Version 2.02 (2/3/2014)
  • Discontinuous Video or Audio with XDCAM Playback (12/23/2013)
  • Replacing DR-606 Board in Units with Software Earlier than V1.95 (7/29/2013)
  • Software Upgrade - Content Browser (CTB-1) Version 2.0.1 (5/6/2013)
  • XDCAM Software Availability (2/18/2013)
  • Error91-215 or Backlight Not Lit (8/20/2012)
  • Firmware Upgrade - Version 2.01 (5/14/2012)
  • Firmware Upgrade - Version 2.00 (5/7/2012)
  • Loose V Shoe Assembly or Wedge Screws (6/27/2011)
  • Loose Bolts on VF Slide (6/20/2011)
  • Firmware Upgrade - Version 1.99 (6/28/2010)
  • Software Upgrade - PDZ-1 Version 2.70 and FAM Driver Version 2.30 (5/3/2010)
  • Parts Registration - Loader (P100) Assembly RP (5/3/2010)
  • Lost Data When Recording Immediately After Inserting Unformatted Disc (4/26/2010)
  • How To Change Reference Audio Output Level From +4dBu To 0dBu (2/15/2010)
  • Clearing Errors Displayed After Replacing Optical Block (1/18/2010)
  • Parts Registration - XLR Microphone Connector (12/14/2009)
  • Parts Registration - LCD Lock Knob, LCD Lock Base (10/12/2009)
  • Software Upgrade - PDZ-1 Version 2.60 and FAM Driver Version 2.20 (10/5/2009)
  • Parts Registration - Sub (DC OUT) Harness (10/5/2009)
  • Parts Registration - Hinge Blind Plate (9/21/2009)
  • Parts Registration - Top Cover (7/13/2009)
  • Firmware Upgrade - Version 1.98 (6/29/2009)
  • Parts Registration - Outside Panel Sub Assembly (4/13/2009)
  • Mechanical Play in SDI BNC Connector on Rear Panel (4/13/2009)
  • How To Operate RPN Manage Menu (4/13/2009)
  • Firmware Upgrade - Version 1.96 (2/16/2009)
  • Parts Registration - LCD Cover (2/2/2009)
  • Parts Registration - Protector (2/2/2009)
  • No Power or Fused Battery Terminals (1/26/2009)
  • Play in Lens Mount (12/29/2008)
  • Disc Does Not Load in Drive Maintenance Menu; Drive Maintenance Menu Cannot Be Accessed (12/22/2008)
  • Software Upgrade - PDZ-1 Version 2.50 and FAM Driver Version 2.10 (12/22/2008)
  • Disc Lid Does Not Open or Screen Does Not Refresh When Executing Drive Maintenance (11/10/2008)
  • Manual Correction - Part Number For PLD Download Tool (11/3/2008)
  • Firmware Upgrade - Version 1.95; AT Version 1.20 (10/6/2008)
  • Reading Error Message (9/15/2008)
  • Manual Correction - Sub Code Added To Error 20 and Error 91 (8/4/2008)
  • Manual Correction - Periodic Check/Replacement Parts List (7/28/2008)
  • Manual Correction - Part Number For DVP-DR Extension Tool (7/7/2008)
  • High Frequency Component of Video Output Deteriorates (7/7/2008)
  • Audio Signal Not Recorded (6/16/2008)
  • Parts Registration - Inside Panel Sub-Assembly (6/2/2008)
  • Software Upgrade - PDZ-1 Version 2.30 and FAM Driver Version 2.03 (6/2/2008)
  • How To Use ND Comp (5/5/2008)
  • Firmware Upgrade - Version 1.93; At Version 1.10 (3/31/2008)
  • Software Upgrade - PDZ-1 Version 2.23 and FAM Driver Version 2.02 (2/18/2008)
  • Red Error Log (2/25/2008)
  • F335/F355 Version 2.02 (2/3/2014)
  • 606 Board in Units with Software Earlier than V1.95 (7/29/2013)
  • 1) Version 2.0.1 (5/6/2013)
  • 215 or Backlight Not Lit (8/20/2012)
  • Version 2.01 (5/14/2012)
  • Version 2.00 (5/7/2012)
  • Version 1.99 (6/28/2010)
  • 1 Version 2.70 and FAM Driver Version 2.30 (5/3/2010)
  • Loader (P100) Assembly RP (5/3/2010)
  • XLR Microphone Connector (12/14/2009)
  • LCD Lock Knob, LCD Lock Base (10/12/2009)
  • 1 Version 2.60 and FAM Driver Version 2.20 (10/5/2009)
  • Sub (DC OUT) Harness (10/5/2009)
  • Hinge Blind Plate (9/21/2009)
  • Top Cover (7/13/2009)
  • Version 1.98 (6/29/2009)
  • Outside Panel Sub Assembly (4/13/2009)
  • Version 1.96 (2/16/2009)
  • LCD Cover (2/2/2009)
  • Protector (2/2/2009)
  • 1 Version 2.50 and FAM Driver Version 2.10 (12/22/2008)
  • Part Number For PLD Download Tool (11/3/2008)
  • Version 1.95; AT Version 1.20 (10/6/2008)
  • Sub Code Added To Error 20 and Error 91 (8/4/2008)
  • Periodic Check/Replacement Parts List (7/28/2008)
  • DR Extension Tool (7/7/2008)
  • Assembly (6/2/2008)
  • 1 Version 2.30 and FAM Driver Version 2.03 (6/2/2008)
  • Version 1.93; At Version 1.10 (3/31/2008)
  • 1 Version 2.23 and FAM Driver Version 2.02 (2/18/2008)
Call
Mobile
(818) 244-4440
Toll Free: (800) 255-5045