Sony Camera & Deck Repair

Skip Navigation LinksHome > Camcorder - Camera and Deck Repair > Sony Camera and Deck Repair

Cassette Deck Repair

Sony PDWF1600

Related Models:   PDW-F1600 
  • FREE Estimaes
  • All repairs and Services are done in-house to insure quick turnaround time
  • Most repairs are guaranteed for six months
Sony PDWF1600 repair, firmware upgrade, SDI port, no power, no audio, liquid salt sand damage, front glass replacement, firewire, rejecting media, physical damage, broken lens, Technical-Service Bulletins - tek media group

Sony Cassette Deck most requested repairs

  • No Power
  • Soft back focus
  • Battery does not charge
  • Dust inside the lens
  • SDI port is not working
  • SDI port yanked out or damaged
  • Dropped physical damage
  • liquid damage
  • Salt sand dust inside the camera
  • LCD display not working
  • Iris blades stuck

Self Diagnosis Error Codes

Before you send or bring the camera to us for a repair: Your camcorder has a self-diagnosis display function. This condition displays your camcorders condition as a five digit code (combination of letters, numbers and figures) on the LCD screen display windows or on the view finder. If the five digit code is displayed. Check the error code chart, the last two digits indicated by □□ will differ depending on the state of your camcorder. If you are experiencing following error codes on your Sony camera or deck, most likely your camera or deck hardware has failed and needs an immediate attention. Call chat or email us to find a quick resolutions.

Technical/Service Bulletins

  • Base Assembly (3/21/2016)
  • Version 3.00 (1/4/2016)
  • Version 2.04 (7/27/2015)
  • Version 2.02 (4/6/2015)
  • Plug Holder of Power Cable Cannot Be Locked to Unit (9/22/2014)
  • Audio Noise With DC Power Supply (5/26/2014)
  • Power Supply Assembly (4/21/2014)
  • Write Data Failure From PC to XDCAM with FAM Connection (3/17/2014)
  • Version 1.95 (1/27/2014)
  • Discontinuous Video or Audio with XDCAM Playback (12/23/2013)
  • Version 1.92 (10/21/2013)
  • 1) Version 2.0.1 (5/6/2013)
  • Vibration Environments (4/1/2013)
  • XDCAM Software Availability (2/18/2013)
  • Power ON/OFF Disabled From Recessed Power Switch on Front Panel (1/28/2013)
  • Version 1.78 (5/14/2012)
  • Version 1.74 (12/19/2011)
  • Version 1.76 (12/19/2011)
  • Version 1.71 (11/7/2011)
  • Version 1.72 (11/7/2011)
  • Rotary Encoder (7/26/2010)
  • Version 1.66 (6/14/2010)
  • Operation Manual Corrections; How to Run VTRs in Synchronized Operation (6/14/2010)
  • 1 Version 2.70 and FAM Driver Version 2.30 (5/3/2010)
  • Version 1.63 (4/26/2010)
  • 4 Boards (4/5/2010)
  • Version 1.52 (3/15/2010)
  • Clearing Errors Displayed After Replacing Optical Block (1/18/2010)
  • 1 Version 2.60 and FAM Driver Version 2.20 (10/5/2009)
  • F1600 (10/5/2009)
Call
Mobile
(818) 244-4440
Toll Free: (800) 255-5045