Sony Camera & Deck Repair

Skip Navigation LinksHome > Camcorder - Camera and Deck Repair > Sony Camera and Deck Repair

Camcorder Repair

Sony PDW539P

Related Models:   PDW-539P 
  • FREE Estimaes
  • All repairs and Services are done in-house to insure quick turnaround time
  • Most repairs are guaranteed for six months
Sony PDW539P repair, firmware upgrade, SDI port, no power, no audio, liquid salt sand damage, front glass replacement, firewire, rejecting media, physical damage, broken lens, Technical-Service Bulletins - tek media group

Sony Camcorder most requested repairs

  • No Power
  • Soft back focus
  • Battery does not charge
  • Dust inside the lens
  • SDI port is not working
  • SDI port yanked out or damaged
  • Dropped physical damage
  • liquid damage
  • Salt sand dust inside the camera
  • LCD display not working
  • Iris blades stuck

PMW

Self Diagnosis Error Codes

Before you send or bring the camera to us for a repair: Your camcorder has a self-diagnosis display function. This condition displays your camcorders condition as a five digit code (combination of letters, numbers and figures) on the LCD screen display windows or on the view finder. If the five digit code is displayed. Check the error code chart, the last two digits indicated by □□ will differ depending on the state of your camcorder. If you are experiencing following error codes on your Sony camera or deck, most likely your camera or deck hardware has failed and needs an immediate attention. Call chat or email us to find a quick resolutions.

Technical/Service Bulletins

  • Parts Registration - CBK-SD01 (7/18/2016)
  • Discontinuous Video or Audio with XDCAM Playback (12/23/2013)
  • Software Upgrade - Content Browser (CTB-1) Version 2.0.1 (5/6/2013)
  • XDCAM Software Availability (2/18/2013)
  • Loose V Shoe Assembly or Wedge Screws (6/27/2011)
  • Software Upgrade - PDZ-1 Version 2.70 and FAM Driver Version 2.30 (5/3/2010)
  • Parts Registration - Loader (P100) Assembly RP (5/3/2010)
  • Parts Registration - Panel Sheet and Color LCD (4/5/2010)
  • No Power or Fused Battery Terminals (3/8/2010)
  • Clearing Errors Displayed After Replacing Optical Block (1/18/2010)
  • Parts Registration - XLR Microphone Connector (12/14/2009)
  • No Picture on LCD or Picture Not Inverted With Tilted LCD (12/7/2009)
  • Parts Registration - SW Push Res in Inside Panel (10/12/2009)
  • Parts Registration - CN-2439 Board (8/17/2009)
  • Replacing VTR Start Button (7/20/2009)
  • Parts Registration - Guard Holder and Slider (5/18/2009)
  • Mechanical Play in SDI BNC Connector on Rear Panel (4/13/2009)
  • No Response to Commands or Loader Error 20-111 at Power-On (12/29/2008)
  • Parts Registration - Loader Harness (8/18/2008)
  • Fractured Belt Hook on Handle (6/16/2008)
  • Parts Registration - HP-118 and HP-119 Boards (6/2/2008)
  • Operation and Service Manual Correction - Description for 2Sec CLR Preset (4/28/2008)
  • Error in Loading Operation; Checking Loader Screws (4/28/2008)
  • Error03-354 or ILL DISC Error When Inserting Dual-Layer Disc (4/28/2008)
  • Manual Correction - Front Guard Volume in Front Panel Assembly (3/17/2008)
  • PB-COND-Yellow or PB-COND-Red Error Log (2/25/2008)
  • Reuse EEPROM When Replacing HN-292/293 or DR-550/550G Board (1/21/2008)
  • SC01 (8/1/2016)
  • SD01 (7/18/2016)
  • 1) Version 2.0.1 (5/6/2013)
  • 1 Version 2.70 and FAM Driver Version 2.30 (5/3/2010)
  • Loader (P100) Assembly RP (5/3/2010)
  • Panel Sheet and Color LCD (4/5/2010)
  • XLR Microphone Connector (12/14/2009)
  • SW Push Res in Inside Panel (10/12/2009)
  • 2439 Board (8/17/2009)
  • Guard Holder and Slider (5/18/2009)
  • On (12/29/2008)
  • Loader Harness (8/18/2008)
  • 119 Boards (6/2/2008)
  • Description for 2Sec CLR Preset (4/28/2008)
  • Layer Disc (4/28/2008)
  • Front Guard Volume in Front Panel Assembly (3/17/2008)
  • Red Error Log (2/25/2008)
  • 550/550G Board (1/21/2008)
Call
Mobile
(818) 244-4440
Toll Free: (800) 255-5045