Camcorder Repair

Sony PDW-V1/10

Related Models:   PDWV1 ; PDW-V1 ; PDW-V1/1 ; PDW-V1--C ; PDW-V1--C1 ; PDW-V1--C10 
  • FREE Estimaes
  • All repairs and Services are done in-house to insure quick turnaround time
  • Most repairs are guaranteed for six months
Sony PDW-V1/10 repair, firmware upgrade, SDI port, no power, no audio, liquid salt sand damage, front glass replacement, firewire, rejecting media, physical damage, broken lens, Technical-Service Bulletins - tek media group

Sony Camcorder most requested repairs

  • No Power
  • Soft back focus
  • Battery does not charge
  • Dust inside the lens
  • SDI port is not working
  • SDI port yanked out or damaged
  • Dropped physical damage
  • liquid damage
  • Salt sand dust inside the camera
  • LCD display not working
  • Iris blades stuck

Self Diagnosis Error Codes

Before you send or bring the camera to us for a repair: Your camcorder has a self-diagnosis display function. This condition displays your camcorders condition as a five digit code (combination of letters, numbers and figures) on the LCD screen display windows or on the view finder. If the five digit code is displayed. Check the error code chart, the last two digits indicated by □□ will differ depending on the state of your camcorder. If you are experiencing following error codes on your Sony camera or deck, most likely your camera or deck hardware has failed and needs an immediate attention. Call chat or email us to find a quick resolutions.

Technical/Service Bulletins


  • Discontinuous Video or Audio with XDCAM Playback (12/23/2013)
  • 1) Version 2.0.1 (5/6/2013)
  • XDCAM Software Availability (2/18/2013)
  • Rotary Encoder (7/26/2010)
  • 1 Version 2.70 and FAM Driver Version 2.30 (5/3/2010)
  • Loader (P100) Assembly RP (5/3/2010)
  • Clearing Errors Displayed After Replacing Optical Block (1/18/2010)
  • Virus Software on PC Connected To XDCAM Unit (10/5/2009)
  • 1 Version 2.60 and FAM Driver Version 2.20 (10/5/2009)
  • Battery Connector (4/6/2009)
  • Checking Battery Connector (1/12/2009)
  • 1 Version 2.50 and FAM Driver Version 2.10 (12/22/2008)
  • Version 1.60 (9/1/2008)
  • Loader Harness (8/18/2008)
  • 1 Version 2.30 and FAM Driver Version 2.03 (6/2/2008)
  • Precaution When Replacing Inner Case (5/5/2008)
  • Error in Loading Operation; Checking Loader Screws (4/28/2008)
  • Layer Disc (4/28/2008)
  • Red Error Log (2/25/2008)
  • 1 Version 2.23 and FAM Driver Version 2.02 (2/18/2008)
  • 550/550G Board (1/21/2008)
  • 1 Version 2.21 and FAM Driver Version 1.60 (11/12/2007)
  • 1 Version 2.20 and FAM Driver Version 1.50 (8/20/2007)
  • Improved Manual Eject Operation (5/28/2007)
  • Version 1.47 (2/5/2007)
  • Version 1.56 (2/5/2007)
  • 1 Version 2.11 and FAM Driver Version 1.50 (2/5/2007)
  • 1 Version 2.10 and FAM Driver Version 1.50 (11/20/2006)
  • 1 (8/28/2006)
  • 811 In Units Using P1 Loader (6/12/2006)
  • RD Adjustment and Skew Adjustment (5/8/2006)
  • New Parts Compatibility Information (5/8/2006)
  • Seek Motor Assembly and Gear No. 2 (3/20/2006)
  • DPR) (3/20/2006)
  • i.LINK Circuit Damaged By Incorrect Insertion of i.LINK Cable (3/13/2006)
  • Dark or Permanently Lit Pixels on LCD Panel (2/13/2006)
  • 211 (12/26/2005)
  • Using FTP Client Software (12/26/2005)
  • Supplementary Operation Information For Use With Firmware V1.45 (12/12/2005)
  • 1 Version 1.40 and FAM Driver Version 1.31 (11/28/2005)
  • Version 1.45 (11/28/2005)
  • V1 Version 1.25 (8/29/2005)
  • 1 Version 1.30 and FAM Driver Version 1.21 (8/22/2005)
  • Adjustments Required After Replacing Drive Assembly (RP) (8/8/2005)
  • Cartridge Cannot Be Detected After Loading (3/28/2005)
  • Link Output Signal (3/21/2005)
  • Eject Lever (3/21/2005)
  • How To Upgrade XDCAM Firmware (10/4/2004)
  • Saving Network Settings (8/16/2004)
phoneIcon
(818) 244-4440
Toll Free: (800) 255-5045