Sony Camera & Deck Repair

Skip Navigation LinksHome > Camcorder - Camera and Deck Repair > Sony Camera and Deck Repair

Camcorder Repair

Sony PDW-F800

Related Models:   PDWF800 
  • FREE Estimaes
  • All repairs and Services are done in-house to insure quick turnaround time
  • Most repairs are guaranteed for six months
Sony PDW-F800 repair, firmware upgrade, SDI port, no power, no audio, liquid salt sand damage, front glass replacement, firewire, rejecting media, physical damage, broken lens, Technical-Service Bulletins - tek media group

Sony Camcorder most requested repairs

  • No Power
  • Soft back focus
  • Battery does not charge
  • Dust inside the lens
  • SDI port is not working
  • SDI port yanked out or damaged
  • Dropped physical damage
  • liquid damage
  • Salt sand dust inside the camera
  • LCD display not working
  • Iris blades stuck

PMW

Self Diagnosis Error Codes

Before you send or bring the camera to us for a repair: Your camcorder has a self-diagnosis display function. This condition displays your camcorders condition as a five digit code (combination of letters, numbers and figures) on the LCD screen display windows or on the view finder. If the five digit code is displayed. Check the error code chart, the last two digits indicated by □□ will differ depending on the state of your camcorder. If you are experiencing following error codes on your Sony camera or deck, most likely your camera or deck hardware has failed and needs an immediate attention. Call chat or email us to find a quick resolutions.

Technical/Service Bulletins

  • HD01 Option (2/8/2016)
  • OLPF Assembly as Substitute for Optical Filter Unit (1/18/2016)
  • 700/F800 V1.87 (11/2/2015)
  • Loose Shoulder Belt (6/30/2014)
  • Write Data Failure From PC to XDCAM with FAM Connection (3/17/2014)
  • F335/F355 Version 2.02 (2/3/2014)
  • Discontinuous Video or Audio with XDCAM Playback (12/23/2013)
  • No Signal or Power (12/16/2013)
  • Horizontal Streak on Color LCD (11/25/2013)
  • 700/F800 Version 1.85 (10/21/2013)
  • 1) Version 2.0.1 (5/6/2013)
  • XDCAM Software Availability (2/18/2013)
  • Version 1.83 (10/8/2012)
  • Version 1.81 (9/17/2012)
  • 215 or Backlight Not Lit (8/20/2012)
  • Hissing Noise in Audio Input From Rear Audio in Connectors (8/20/2012)
  • On (5/14/2012)
  • Version 1.80 (12/26/2011)
  • 157 Board (10/10/2011)
  • Loose V Shoe Assembly or Wedge Screws (6/27/2011)
  • Loose Bolts on VF Slide (6/20/2011)
  • Type Accessory Shoe on Handle (5/30/2011)
  • Switch Door Magnet C and Switch Door (R) Assembly (4/4/2011)
  • Version 1.71 (3/21/2011)
  • Software Version 1.67 (11/15/2010)
  • 617 Board and CCD Block Assembly (10/11/2010)
  • Version 1.66 (6/14/2010)
  • Version 1.63 (6/14/2010)
  • 1 Version 2.70 and FAM Driver Version 2.30 (5/3/2010)
  • Loader (P100) Assembly RP (5/3/2010)
  • 355 Board (4/5/2010)
  • Clearing Errors Displayed After Replacing Optical Block (1/18/2010)
  • Excessive Aberration Compensation; Knee Curve Error During DCC Off (12/28/2009)
  • WRR Case (12/28/2009)
  • SW Push Res in Inside Panel (10/12/2009)
  • Version 1.53 (10/12/2009)
  • LCD Lock Knob, LCD Lock Base (10/12/2009)
  • Virus Software on PC Connected To XDCAM Unit (10/5/2009)
  • 1 Version 2.60 and FAM Driver Version 2.20 (10/5/2009)
  • Microphone Spacer (9/28/2009)
Call
Mobile
(818) 244-4440
Toll Free: (800) 255-5045