Camcorder Repair

Sony PDW-530P--C2

  • FREE Estimaes
  • All repairs and Services are done in-house to insure quick turnaround time
  • Most repairs are guaranteed for six months
Sony PDW-530P--C2 repair, firmware upgrade, SDI port, no power, no audio, liquid salt sand damage, front glass replacement, firewire, rejecting media, physical damage, broken lens, Technical-Service Bulletins - tek media group

Sony Camcorder most requested repairs

  • No Power
  • Soft back focus
  • Battery does not charge
  • Dust inside the lens
  • SDI port is not working
  • SDI port yanked out or damaged
  • Dropped physical damage
  • liquid damage
  • Salt sand dust inside the camera
  • LCD display not working
  • Iris blades stuck

Self Diagnosis Error Codes

Before you send or bring the camera to us for a repair: Your camcorder has a self-diagnosis display function. This condition displays your camcorders condition as a five digit code (combination of letters, numbers and figures) on the LCD screen display windows or on the view finder. If the five digit code is displayed. Check the error code chart, the last two digits indicated by □□ will differ depending on the state of your camcorder. If you are experiencing following error codes on your Sony camera or deck, most likely your camera or deck hardware has failed and needs an immediate attention. Call chat or email us to find a quick resolutions.

Technical/Service Bulletins


  • SC01 (8/1/2016)
  • SD01 (7/18/2016)
  • Discontinuous Video or Audio with XDCAM Playback (12/23/2013)
  • 1) Version 2.0.1 (5/6/2013)
  • XDCAM Software Availability (2/18/2013)
  • 2437 Board (8/29/2011)
  • Loose V Shoe Assembly or Wedge Screws (6/27/2011)
  • 1 Version 2.70 and FAM Driver Version 2.30 (5/3/2010)
  • Loader (P100) Assembly RP (5/3/2010)
  • Panel Sheet and Color LCD (4/5/2010)
  • No Power or Fused Battery Terminals (3/8/2010)
  • Clearing Errors Displayed After Replacing Optical Block (1/18/2010)
  • XLR Microphone Connector (12/14/2009)
  • No Picture on LCD or Picture Not Inverted With Tilted LCD (12/7/2009)
  • SW Push Res in Inside Panel (10/12/2009)
  • 1 Version 2.60 and FAM Driver Version 2.20 (10/5/2009)
  • 2439 Board (8/17/2009)
  • Camera Shoe and Mounting Wedge Integrated Into VF Shoe Assembly (7/20/2009)
  • Replacing VTR Start Button (7/20/2009)
  • Guard Holder and Slider (5/18/2009)
  • Battery Connector (4/6/2009)
  • Checking Battery Connector (1/12/2009)
  • 1 Version 2.50 and FAM Driver Version 2.10 (12/22/2008)
  • Version 1.60 (9/1/2008)
  • Fractured Belt Hook on Handle (6/16/2008)
  • 119 Boards (6/2/2008)
  • 1 Version 2.30 and FAM Driver Version 2.03 (6/2/2008)
  • Description for 2Sec CLR Preset (4/28/2008)
  • Error in Loading Operation; Checking Loader Screws (4/28/2008)
  • Layer Disc (4/28/2008)
  • Variable Resistor Nut (4/14/2008)
  • Front Guard Volume in Front Panel Assembly (3/17/2008)
  • Red Error Log (2/25/2008)
  • 1 Version 2.23 and FAM Driver Version 2.02 (2/18/2008)
  • 550/550G Board (1/21/2008)
  • Firmware Version Required to Support PFD23A (12/24/2007)
  • Cracked Volume Knob (11/19/2007)
  • 1 Version 2.21 and FAM Driver Version 1.60 (11/12/2007)
  • New Parts Compatibility Information (10/15/2007)
  • AT Version 1.51 (8/20/2007)
  • 1 Version 2.20 and FAM Driver Version 1.50 (8/20/2007)
  • Improved Manual Eject Operation (5/28/2007)
  • Version 1.56 (2/12/2007)
  • 125 When Using Anton Battery (2/5/2007)
  • 1 Version 2.11 and FAM Driver Version 1.50 (2/5/2007)
  • No Picture or Inverted Picture on LCD Panel (1/15/2007)
  • 14 TripPod Attachment (1/8/2007)
  • Iris Mode of Lens Operates in Auto Even When Set to Manual (1/1/2007)
  • Note When Replacing Battery Connector (1/1/2007)
  • Free Prism (12/25/2006)
  • 1 Version 2.10 and FAM Driver Version 1.50 (11/20/2006)
  • Change in VA Gain Adjustment Level When Replacing CCD Block (11/13/2006)
  • 125 When Using Anton Battery (10/30/2006)
  • Broken Handle (10/30/2006)
  • Version 1.48 (10/23/2006)
  • 1 (8/28/2006)
  • Bouncing Black Levels (8/21/2006)
  • Version 1.46 (8/14/2006)
  • Version 1.45; At Version 1.40 (7/10/2006)
  • Screws on Back of VF Loosen (6/12/2006)
  • 811 In Units Using P1 Loader (6/12/2006)
  • 154 Board (6/12/2006)
  • Camera Picture Cannot Be Output (6/5/2006)
  • Picture on LCD Panel Cannot Be Inverted (5/8/2006)
  • RD Adjustment and Skew Adjustment (5/8/2006)
  • 14 or Higher (5/8/2006)
  • Noise or Disrupted Audio (5/8/2006)
  • Seek Motor Assembly and Gear No. 2 (3/20/2006)
  • Frequency Fan Noise (1/16/2006)
  • 211 (12/26/2005)
  • PA, VA, and SE Boards (12/26/2005)
  • Using FTP Client Software (12/26/2005)
  • Supplementary Operation Information For Use With Firmware V1.45 (12/12/2005)
  • Like Signal Noise (12/5/2005)
  • 1 Version 1.40 and FAM Driver Version 1.31 (11/28/2005)
  • Camcorder Powers Down When VF is Inserted or Removed (11/14/2005)
  • At Version 1.33; Low Light Warning (10/10/2005)
  • 58 Board) (9/5/2005)
  • Version 1.26; At Version 1.32 (9/5/2005)
  • 1 Version 1.30 and FAM Driver Version 1.21 (8/22/2005)
  • Adjustments Required After Replacing Drive Assembly (RP) (8/8/2005)
  • Outside Panel Assembly (5/9/2005)
  • Cartridge Cannot Be Detected After Loading (3/28/2005)
  • Link Output Signal (3/21/2005)
  • Protector Peels Off (3/21/2005)
  • Camera and VDR Software Update (2/14/2005)
  • Harness and Rear Panel Assembly (12/27/2004)
  • Loose Microphone (11/22/2004)
  • Lock Release Button of Color LCD comes Off (11/22/2004)
  • REC Light Slow to Respond (11/22/2004)
  • How To Upgrade XDCAM Firmware (10/4/2004)
  • 926 Board (9/20/2004)
phoneIcon
(818) 244-4440
Toll Free: (800) 255-5045