Camcorder Repair

Sony PDW-510P--U

  • FREE Estimaes
  • All repairs and Services are done in-house to insure quick turnaround time
  • Most repairs are guaranteed for six months
Sony PDW-510P--U repair, firmware upgrade, SDI port, no power, no audio, liquid salt sand damage, front glass replacement, firewire, rejecting media, physical damage, broken lens, Technical-Service Bulletins - tek media group

Sony Camcorder most requested repairs

  • No Power
  • Soft back focus
  • Battery does not charge
  • Dust inside the lens
  • SDI port is not working
  • SDI port yanked out or damaged
  • Dropped physical damage
  • liquid damage
  • Salt sand dust inside the camera
  • LCD display not working
  • Iris blades stuck

Self Diagnosis Error Codes

Before you send or bring the camera to us for a repair: Your camcorder has a self-diagnosis display function. This condition displays your camcorders condition as a five digit code (combination of letters, numbers and figures) on the LCD screen display windows or on the view finder. If the five digit code is displayed. Check the error code chart, the last two digits indicated by □□ will differ depending on the state of your camcorder. If you are experiencing following error codes on your Sony camera or deck, most likely your camera or deck hardware has failed and needs an immediate attention. Call chat or email us to find a quick resolutions.

Technical/Service Bulletins


  • Discontinuous Video or Audio with XDCAM Playback (12/23/2013)
  • XDCAM Software Availability (2/18/2013)
  • Incorrect Part Number Printed on CN-2437 Board (8/29/2011)
  • Loose V Shoe Assembly or Wedge Screws (6/27/2011)
  • Software Upgrade - PDZ-1 Version 2.70 and FAM Driver Version 2.30 (5/3/2010)
  • Parts Registration - Loader (P100) Assembly RP (5/3/2010)
  • Parts Registration - Panel Sheet and Color LCD (4/5/2010)
  • No Power or Fused Battery Terminals (3/8/2010)
  • Clearing Errors Displayed After Replacing Optical Block (1/18/2010)
  • Parts Registration - XLR Microphone Connector (12/14/2009)
  • No Picture on LCD or Picture Not Inverted With Tilted LCD (12/7/2009)
  • Software Upgrade - PDZ-1 Version 2.60 and FAM Driver Version 2.20 (10/5/2009)
  • Parts Registration - CN-2439 Board (8/17/2009)
  • Parts Registration - Camera Shoe and Mounting Wedge Integrated Into VF Shoe Assembly (7/20/2009)
  • Replacing VTR Start Button (7/20/2009)
  • Battery Connector (4/6/2009)
  • Checking Battery Connector (1/12/2009)
  • Software Upgrade - PDZ-1 Version 2.50 and FAM Driver Version 2.10 (12/22/2008)
  • Firmware Upgrade - Version 1.60 (9/1/2008)
  • Fractured Belt Hook on Handle (6/16/2008)
  • Parts Registration - HP-118 and HP-119 Boards (6/2/2008)
  • Software Upgrade - PDZ-1 Version 2.30 and FAM Driver Version 2.03 (6/2/2008)
  • Operation and Service Manual Correction - Description for 2Sec CLR Preset (4/28/2008)
  • Error in Loading Operation; Checking Loader Screws (4/28/2008)
  • Error03-354 or ILL DISC Error When Inserting Dual-Layer Disc (4/28/2008)
  • Manual Correction - Front Guard Volume in Front Panel Assembly (3/17/2008)
  • PB-COND-Yellow or PB-COND-Red Error Log (2/25/2008)
  • Software Upgrade - PDZ-1 Version 2.23 and FAM Driver Version 2.02 (2/18/2008)
  • Reuse EEPROM When Replacing HN-292/293 or DR-550/550G Board (1/21/2008)
  • Firmware Version Required to Support PFD23A (12/24/2007)
  • Cracked Volume Knob (11/19/2007)
  • Software Upgrade - PDZ-1 Version 2.21 and FAM Driver Version 1.60 (11/12/2007)
  • Parts Registration - New Parts Compatibility Information (10/15/2007)
  • Firmware Upgrade - AT Version 1.51 (8/20/2007)
  • Software Upgrade - PDZ-1 Version 2.20 and FAM Driver Version 1.50 (8/20/2007)
  • Improved Manual Eject Operation (5/28/2007)
  • Firmware Upgrade - Version 1.56 (2/12/2007)
  • Error E91-125 When Using Anton Battery (2/5/2007)
  • Software Upgrade - PDZ-1 Version 2.11 and FAM Driver Version 1.50 (2/5/2007)
  • No Picture or Inverted Picture on LCD Panel (1/15/2007)
  • Improved Docking of V Shoe Assembly on Camera To VCT-14 TripPod Attachment (1/8/2007)
  • Iris Mode of Lens Operates in Auto Even When Set to Manual (1/1/2007)
  • Note When Replacing Battery Connector (1/1/2007)
  • Software Upgrade - PDZ-1 Version 2.10 and FAM Driver Version 1.50 (11/20/2006)
  • Change in VA Gain Adjustment Level When Replacing CCD Block (11/13/2006)
  • Error E91-125 When Using Anton Battery (10/30/2006)
  • Broken Handle (10/30/2006)
  • Firmware Upgrade - Version 1.48 (10/23/2006)
  • Disc Not Recognized With EDL in BVE-9100 Format Written By PDZ-1 (8/28/2006)
  • Bouncing Black Levels (8/21/2006)
  • Firmware Upgrade - Version 1.46 (8/14/2006)
  • Firmware Upgrade - Version 1.45; At Version 1.40 (7/10/2006)
  • Screws on Back of VF Loosen (6/12/2006)
  • Err20-811 In Units Using P1 Loader (6/12/2006)
  • Boot Upgrade Not Required When Replacing AT-154 Board (6/12/2006)
  • Camera Picture Cannot Be Output (6/5/2006)
  • Picture on LCD Panel Cannot Be Inverted (5/8/2006)
  • Manual Correction - RD Adjustment and Skew Adjustment (5/8/2006)
  • Test Out DISP SEL Function Requires DVP-26 Board With Suffix -14 or Higher (5/8/2006)
  • Noise or Disrupted Audio (5/8/2006)
  • Manual Correction - D401 on AXM Board (3/20/2006)
  • High-Frequency Fan Noise (1/16/2006)
  • BRD-P1 Loader Error 20-811 or 20-211 (12/26/2005)
  • Using FTP Client Software (12/26/2005)
  • Supplementary Operation Information For Use With Firmware V1.45 (12/12/2005)
  • Morse Code-Like Signal Noise (12/5/2005)
  • Software Upgrade - PDZ-1 Version 1.40 and FAM Driver Version 1.31 (11/28/2005)
  • Camcorder Powers Down When VF is Inserted or Removed (11/14/2005)
  • Firmware Upgrade - At Version 1.33; Low Light Warning (10/10/2005)
  • Bit Errors With CBK-FC01 (PP-58 Board) (9/5/2005)
  • Firmware Upgrade - Version 1.26; At Version 1.32 (9/5/2005)
  • Software Upgrade - PDZ-1 Version 1.30 and FAM Driver Version 1.21 (8/22/2005)
  • Adjustments Required After Replacing Drive Assembly (RP) (8/8/2005)
  • Manual Correction - Outside Panel Assembly (5/9/2005)
  • Cartridge Cannot Be Detected After Loading (3/28/2005)
  • Noise In i-Link Output Signal (3/21/2005)
  • Protector Peels Off (3/21/2005)
  • Manual Correction - Camera and VDR Software Update (2/14/2005)
  • Loose Microphone (11/22/2004)
  • Lock Release Button of Color LCD comes Off (11/22/2004)
  • REC Light Slow to Respond (11/22/2004)
  • How To Upgrade XDCAM Firmware (10/4/2004)
  • Manual Correction - EX-926 Board (9/20/2004)
  • SC01 (8/1/2016)
  • SD01 (7/18/2016)
  • 1) Version 2.0.1 (5/6/2013)
  • 2437 Board (8/29/2011)
  • 1 Version 2.70 and FAM Driver Version 2.30 (5/3/2010)
  • Loader (P100) Assembly RP (5/3/2010)
  • Panel Sheet and Color LCD (4/5/2010)
  • XLR Microphone Connector (12/14/2009)
  • SW Push Res in Inside Panel (10/12/2009)
  • 1 Version 2.60 and FAM Driver Version 2.20 (10/5/2009)
  • 2439 Board (8/17/2009)
  • Camera Shoe and Mounting Wedge Integrated Into VF Shoe Assembly (7/20/2009)
  • Guard Holder and Slider (5/18/2009)
  • 1 Version 2.50 and FAM Driver Version 2.10 (12/22/2008)
  • Version 1.60 (9/1/2008)
  • 119 Boards (6/2/2008)
  • 1 Version 2.30 and FAM Driver Version 2.03 (6/2/2008)
  • Description for 2Sec CLR Preset (4/28/2008)
  • Layer Disc (4/28/2008)
  • Variable Resistor Nut (4/14/2008)
  • Front Guard Volume in Front Panel Assembly (3/17/2008)
  • Red Error Log (2/25/2008)
  • 1 Version 2.23 and FAM Driver Version 2.02 (2/18/2008)
  • 550/550G Board (1/21/2008)
  • 1 Version 2.21 and FAM Driver Version 1.60 (11/12/2007)
  • New Parts Compatibility Information (10/15/2007)
  • AT Version 1.51 (8/20/2007)
  • 1 Version 2.20 and FAM Driver Version 1.50 (8/20/2007)
  • Version 1.56 (2/12/2007)
  • 125 When Using Anton Battery (2/5/2007)
  • 1 Version 2.11 and FAM Driver Version 1.50 (2/5/2007)
  • 14 TripPod Attachment (1/8/2007)
  • Free Prism (12/25/2006)
  • 1 Version 2.10 and FAM Driver Version 1.50 (11/20/2006)
  • 125 When Using Anton Battery (10/30/2006)
  • Version 1.48 (10/23/2006)
  • 1 (8/28/2006)
  • Version 1.46 (8/14/2006)
  • Version 1.45; At Version 1.40 (7/10/2006)
  • 811 In Units Using P1 Loader (6/12/2006)
  • 154 Board (6/12/2006)
  • RD Adjustment and Skew Adjustment (5/8/2006)
  • 14 or Higher (5/8/2006)
  • Seek Motor Assembly and Gear No. 2 (3/20/2006)
  • D401 on AXM Board (3/20/2006)
  • Frequency Fan Noise (1/16/2006)
  • 211 (12/26/2005)
  • PA, VA, and SE Boards (12/26/2005)
  • Like Signal Noise (12/5/2005)
  • 1 Version 1.40 and FAM Driver Version 1.31 (11/28/2005)
  • At Version 1.33; Low Light Warning (10/10/2005)
  • 58 Board) (9/5/2005)
  • Version 1.26; At Version 1.32 (9/5/2005)
  • 1 Version 1.30 and FAM Driver Version 1.21 (8/22/2005)
  • Outside Panel Assembly (5/9/2005)
  • Link Output Signal (3/21/2005)
  • Camera and VDR Software Update (2/14/2005)
  • Harness and Rear Panel Assembly (12/27/2004)
  • 926 Board (9/20/2004)
phoneIcon
(818) 244-4440
Toll Free: (800) 255-5045