Cassette Deck Repair

Sony HDWS2000

Related Models:   HDWS2000P 
  • FREE Estimaes
  • All repairs and Services are done in-house to insure quick turnaround time
  • Most repairs are guaranteed for six months
Sony HDWS2000 repair, firmware upgrade, SDI port, no power, no audio, liquid salt sand damage, front glass replacement, firewire, rejecting media, physical damage, broken lens, Technical-Service Bulletins - tek media group

Sony Cassette Deck most requested repairs

  • No Power
  • Soft back focus
  • Battery does not charge
  • Dust inside the lens
  • SDI port is not working
  • SDI port yanked out or damaged
  • Dropped physical damage
  • liquid damage
  • Salt sand dust inside the camera
  • LCD display not working
  • Iris blades stuck

Self Diagnosis Error Codes

Before you send or bring the camera to us for a repair: Your camcorder has a self-diagnosis display function. This condition displays your camcorders condition as a five digit code (combination of letters, numbers and figures) on the LCD screen display windows or on the view finder. If the five digit code is displayed. Check the error code chart, the last two digits indicated by □□ will differ depending on the state of your camcorder. If you are experiencing following error codes on your Sony camera or deck, most likely your camera or deck hardware has failed and needs an immediate attention. Call chat or email us to find a quick resolutions.

Technical/Service Bulletins


  • 508 Board Every 40,000 Hours of Operation (9/28/2015)
  • Reuse Sensing Head when Replacing S Plate and T Drawer Assemblies (9/21/2015)
  • RAM Backup Battery: Three Years (6/2/2014)
  • 13 (Tape Sensor Error) (4/21/2014)
  • SV Version 6.44 (12/23/2013)
  • Upper Lid (Rear) Assembly (12/16/2013)
  • Hours Meter Value Decreases or is Abnormally High (11/25/2013)
  • 672 Board (1/28/2013)
  • SY Version 6.44 and SV Version 6.43 (5/21/2012)
  • KY Board, FED Module, Control Panel Assembly (4/30/2012)
  • Video Noise When Playing Analog Tape (3/19/2012)
  • Tape Slack in Eject Mode; Tape Damage; Error 01 or Error 02 (10/10/2011)
  • DT and TC Boards (10/10/2011)
  • 04 Reel Speed Error; Rotation of S/T Reel After Inserting Tape (10/10/2011)
  • 64/64A/91 Board Every 40,000 Hours of Operation (10/10/2011)
  • 84 Board Every 40,000 Hours of Operation (10/10/2011)
  • 89 Board Every 40,000 Hours of Operation (10/10/2011)
  • 272 Board Every 40,000 Hours of Operation (10/10/2011)
  • 123/A/P Board Every 40,000 Hours of Operation (10/10/2011)
  • 371 Board Every 40,000 Hours of Operation (10/10/2011)
  • 47 Board Every 40,000 Hours of Operation (10/10/2011)
  • Unstable Power Supply Operation With Improper Connector Installation (10/3/2011)
  • SY Version 7.30 and SV Version 6.43 (8/1/2011)
  • SDI Out or Composite Out Signal; No Lock To External Reference Signal (1/10/2011)
  • Reference Number For Drum Sub Harness (11/15/2010)
  • 4 Settings and Character [R] Displayed in Upper Right of Menu (6/22/2009)
  • Jog/Shuttle Dial Hard To Press or Does Not Switch Modes (6/8/2009)
  • Dial Rotates Past Lock Limit; Dial Returns to Position and Speed Changes (6/8/2009)
  • Block Noise in REV Mode (6/8/2009)
  • Drum Harness (6/8/2009)
  • Trouble Opening/Closing Control Panel (5/4/2009)
  • Abnormal Noise During Reel Shift (5/4/2009)
  • Loud Noise While Threading (5/4/2009)
  • 80 Boards (5/4/2009)
  • 2 (4/6/2009)
  • Cassette Tape Cannot Be Ejected (3/23/2009)
  • SY Version 6.35 and SV Version 6.41 (2/16/2009)
  • Reel Motor Stops Rotating (12/22/2008)
  • SY Version 6.34 and SV Version 6.40 (8/18/2008)
  • Version 1.05 (7/28/2008)
  • Block Noise in Playback Video; AUX/Video/Audio Data Damaged (7/7/2008)
  • 08 (5/5/2008)
  • SY Version 6.33 (5/5/2008)
  • Improved Reliability of S Tension Regulator (3/10/2008)
  • SY Version 6.32 and SV Version 6.31 (7/30/2007)
  • Red Channel Condition (5/14/2007)
  • 275 Flexible PWB in Printed Circuit Board Block (2/19/2007)
  • 02 (1/29/2007)
  • Sub Error Code (1/29/2007)
  • SY Version 6.27 and SV Version 6.26 (10/30/2006)
  • Cassette Compartment Trouble; Error 20; Error 09 (8/14/2006)
  • Dial Knob (8/7/2006)
  • Attaching Fan Motor (8/7/2006)
  • Editing (8/7/2006)
  • Search Dial Function Does Not Operate (7/10/2006)
  • Caution When Replacing Pinch Arm Assembly (4/17/2006)
  • Escutcheon Assembly (2/13/2006)
  • Like Noise in SDI Video Output (2/13/2006)
  • SY Version 6.21 and SV Version 6.20 (11/7/2005)
  • SDI Timing Jitter (10/24/2005)
  • Replacing OSC1 on VPR Borad (8/15/2005)
Call
Mobile
(818) 244-4440
Toll Free: (800) 255-5045