Camera & Cassette Deck Repair

Sony HDWD1800

  • FREE Estimaes
  • All repairs and Services are done in-house to insure quick turnaround time
  • Most repairs are guaranteed for six months
Sony HDWD1800 repair, firmware upgrade, SDI port, no power, no audio, liquid salt sand damage, front glass replacement, firewire, rejecting media, physical damage, broken lens, Technical-Service Bulletins - tek media group

Sony Camera & Cassette Deck most requested repairs

  • No Power
  • Soft back focus
  • Battery does not charge
  • Dust inside the lens
  • SDI port is not working
  • SDI port yanked out or damaged
  • Dropped physical damage
  • liquid damage
  • Salt sand dust inside the camera
  • LCD display not working
  • Iris blades stuck

Self Diagnosis Error Codes

Before you send or bring the camera to us for a repair: Your camcorder has a self-diagnosis display function. This condition displays your camcorders condition as a five digit code (combination of letters, numbers and figures) on the LCD screen display windows or on the view finder. If the five digit code is displayed. Check the error code chart, the last two digits indicated by □□ will differ depending on the state of your camcorder. If you are experiencing following error codes on your Sony camera or deck, most likely your camera or deck hardware has failed and needs an immediate attention. Call chat or email us to find a quick resolutions.

Technical/Service Bulletins


  • Red Channel Condition; Block Noise Recorded on Tape (3/21/2016)
  • 508 Board Every 40,000 Hours of Operation (9/28/2015)
  • Reuse Sensing Head when Replacing S Plate and T Drawer Assemblies (9/21/2015)
  • RAM Backup Battery: Three Years (6/2/2014)
  • 13 (Tape Sensor Error) (4/21/2014)
  • SV Version 6.44 (12/23/2013)
  • Upper Lid (Rear) Assembly (12/16/2013)
  • Hours Meter Value Decreases or is Abnormally High (11/25/2013)
  • 08 (1/28/2013)
  • 672 Board (1/28/2013)
  • Tape Slack in Eject Mode; Tape Damage; Error 01 or Error 02 (10/10/2011)
  • 04 Reel Speed Error; Rotation of S/T Reel After Inserting Tape (10/10/2011)
  • 47 Board Every 40,000 Hours of Operation (10/10/2011)
  • SY Version 7.30 and SV Version 6.43 (8/1/2011)
  • SY1 V2.23, SY2 V2.18, and SV V6.43 (1/10/2011)
  • Panel Assembly (10/19/2009)
  • Dial Rotates Past Lock Limit; Dial Returns to Position and Speed Changes (6/8/2009)
  • Block Noise in REV Mode (6/8/2009)
  • Drum Harness (6/8/2009)
  • Trouble Opening/Closing Control Panel (5/4/2009)
  • Loud Noise While Threading (5/4/2009)
  • 2 (4/6/2009)
  • Cassette Tape Cannot Be Ejected (3/23/2009)
  • SY1 V2.16, SY2 V2.14, and SV V6.41 (2/16/2009)
  • SY1 V2.15, SY2 V2.13, and SV V6.40 (8/18/2008)
  • Block Noise in Playback Video; AUX/Video/Audio Data Damaged (7/7/2008)
  • LCD Assembly (5/26/2008)
  • 08 (5/5/2008)
  • SY1 Version 2.14; SY2 Version 2.11 (5/5/2008)
  • SY1 Version 2.13; SY2 Version 2.09; SV Version 6.35 (4/7/2008)
  • Brush Slip Ring (4/7/2008)
  • Converted Picture in High Temperature Environment (3/17/2008)
  • Improved Reliability of S Tension Regulator (3/10/2008)
  • SY1 Version 2.08; SY2 Version 2.05; SV Version 6.31 (8/13/2007)
phoneIcon
(818) 244-4440
Toll Free: (800) 255-5045