Camera & Cassette Deck Repair

Sony HDW250

  • FREE Estimaes
  • All repairs and Services are done in-house to insure quick turnaround time
  • Most repairs are guaranteed for six months
Sony HDW250 repair, firmware upgrade, SDI port, no power, no audio, liquid salt sand damage, front glass replacement, firewire, rejecting media, physical damage, broken lens, Technical-Service Bulletins - tek media group

Sony Camera & Cassette Deck most requested repairs

  • No Power
  • Soft back focus
  • Battery does not charge
  • Dust inside the lens
  • SDI port is not working
  • SDI port yanked out or damaged
  • Dropped physical damage
  • liquid damage
  • Salt sand dust inside the camera
  • LCD display not working
  • Iris blades stuck

Self Diagnosis Error Codes

Before you send or bring the camera to us for a repair: Your camcorder has a self-diagnosis display function. This condition displays your camcorders condition as a five digit code (combination of letters, numbers and figures) on the LCD screen display windows or on the view finder. If the five digit code is displayed. Check the error code chart, the last two digits indicated by □□ will differ depending on the state of your camcorder. If you are experiencing following error codes on your Sony camera or deck, most likely your camera or deck hardware has failed and needs an immediate attention. Call chat or email us to find a quick resolutions.

Technical/Service Bulletins


  • Parts Registration - DC Fan (8/25/2014)
  • ERROR-0F SYS NOVRAM ERROR (11/11/2013)
  • Cleaning Liquid (10/10/2011)
  • Cleaning Cloth (10/10/2011)
  • Manual Correction - Specification for T2 and T3 T-Side Tape Running Check (10/10/2011)
  • Software Upgrade - SYS Version 1.34 and SV Version 1.24 (12/21/2009)
  • Cassette Tape Ejected at an Angle (5/4/2009)
  • Battery Connector (4/6/2009)
  • RF Signal Does Not Record or Play Back (3/9/2009)
  • Checking Battery Connector (1/12/2009)
  • Software Upgrade - SYS Version 1.33 (8/18/2008)
  • Manual Correction - L Sub Cover on Top and Bottom Panels (2/13/2006)
  • Cleaning Tape Compatibility For Half-Inch VTRs (1/23/2006)
  • Cue and TC Cannot be Recorded (12/5/2005)
  • Extended Drum Replacement Time (9/20/2004)
  • TC Interference (7/19/2004)
  • Manual Correction - Tool Cable For RS-232C Interface Tool Board (5/24/2004)
  • Preventing Screws That Secure Boards From Falling Off (3/17/2003)
  • SYS Software Upgrade - Version 1.29 (2/17/2003)
  • How to Replace Backup Battery on SST-13 Board Without Losing Adjustment Data (1/10/2003)
  • Software Upgrade - SYS Version 1.28 (10/14/2002)
  • Remote Out Connection Cable (6/24/2002)
  • Software Upgrade - SYS Version 1.271; Manual Correction - Condensation (3/4/2002)
  • Shorted Trace of +5V Bus (5/7/2001)
  • Incorrect Operation of Reel Brake and Head Cleaner Solenoids and Slow FF/REW Speed (4/16/2001)
  • Part Registration and Change in Material of Lower Drum Assembly (10/23/2000)
  • DC Fan (8/25/2014)
  • 0F SYS NOVRAM ERROR (11/11/2013)
  • Side Tape Running Check (10/10/2011)
  • SYS Version 1.34 and SV Version 1.24 (12/21/2009)
  • SYS Version 1.33 (8/18/2008)
  • L Sub Cover on Top and Bottom Panels (2/13/2006)
  • Inch VTRs (1/23/2006)
  • 232C Interface Tool Board (5/24/2004)
  • Version 1.29 (2/17/2003)
  • 13 Board Without Losing Adjustment Data (1/10/2003)
  • SYS Version 1.28 (10/14/2002)
  • Condensation (3/4/2002)
Call
Mobile
(818) 244-4440
Toll Free: (800) 255-5045