Subject: No video out through the 26 pin connector cable
Symptom: No video output on the composite video output through 26 pin cable.
Subject: Power turns on and off when pressure is applied to the left cover.
Symptom: Customer complains power turns off intermittently. Applying pressure to the left cover restores power only while continuos pressure is applied.
Subject: Green picture
Symptom: Green picture .
Subject: Open CP3 on PS board.
Symptom: When using RM-P210U remote control with 26pin cables the CP3 on the PS PWBA opens.
Subject: AGC level in black R and in black B cannot be adjusted.
Symptom: AGC level in black R and black B cannot be adjust properly.
Subject: No power.
Symptom: No power with batteries or dc input.
Subject: No power.
Symptom: No power
Subject: Genlock-don't lock
Symptom: GENLOCK DON'T LOCK =LOCK AFTER 4-5HR WORMUP
Subject: POWER WONT TURN ON
Symptom: wont turn on power in termittentsomtimecom on and off
Subject: GREEN ONLY NO VIDEO NO COLO BAR
Symptom: After power switch turn on no video no colo bar only
Subject: No power-cutoff
Symptom: No power-blow fuse cp2-ps 17
Subject: ERROR CODE 4100
Symptom: EXHIBITS ERROR CODE 4100 ON POWER UP WITH NO TAPE.
Subject: Audio has static noise whithout microphone.
Symptom: In the E-E mode, there is loud static noise at audio out jack.
Subject: UNIT WON'T POWER UP WITH DC OR CCU.
Symptom: DEAD, TOTALLY INOPERATIVE UNIT.
Subject: UNIT WON'T POWER UP WITH DC OR CCU.
Symptom: DEAD, TOTALLY INOPERATIVE UNIT.
Subject: Power will not stay on, DC or AC, contiually cycles between on and off.
Symptom: Camera will not stay on with AC or battery, camera contiuallyu cycles on and off
Subject: Intermittant power up on RMP210, 100m cable
Symptom: Intermittant power up on remote supply/controler.
