Camera Repair

JVC GY-DV550EC

  • FREE Estimaes
  • All repairs and Services are done in-house to insure quick turnaround time
  • Most repairs are guaranteed for six months
JVC GY-DV550EC repair, firmware upgrade, SDI port, no power, no audio, liquid salt sand damage, front glass replacement, firewire, rejecting media, physical damage, broken lens, Technical-Service Bulletins - tek media group

JVC Camera most requested repairs

  • Dropped / Abuse
  • SDI port physically damaged
  • SDI port physically not damaged however not working
  • No Pictur
  • Out of Focus
  • Burned smell
  • Missing Pixels
  • Out of Sync
  • Sand salt damage

Specific issues with JVC GY-DV550EC

Subject: No video out through the 26 pin connector cable

Symptom: No video output on the composite video output through 26 pin cable.

Subject: Power turns on and off when pressure is applied to the left cover.

Symptom: Customer complains power turns off intermittently. Applying pressure to the left cover restores power only while continuos pressure is applied.

Subject: Green picture

Symptom: Green picture .

Subject: Open CP3 on PS board.

Symptom: When using RM-P210U remote control with 26pin cables the CP3 on the PS PWBA opens.

Subject: AGC level in black R and in black B cannot be adjusted.

Symptom: AGC level in black R and black B cannot be adjust properly.

Subject: No power.

Symptom: No power with batteries or dc input.

Subject: No power.

Symptom: No power

Subject: Genlock-don't lock

Symptom: GENLOCK DON'T LOCK =LOCK AFTER 4-5HR WORMUP

Subject: POWER WONT TURN ON

Symptom: wont turn on power in termittentsomtimecom on and off

Subject: GREEN ONLY NO VIDEO NO COLO BAR

Symptom: After power switch turn on no video no colo bar only

Subject: No power-cutoff

Symptom: No power-blow fuse cp2-ps 17

Subject: ERROR CODE 4100

Symptom: EXHIBITS ERROR CODE 4100 ON POWER UP WITH NO TAPE.

Subject: Audio has static noise whithout microphone.

Symptom: In the E-E mode, there is loud static noise at audio out jack.

Subject: UNIT WON'T POWER UP WITH DC OR CCU.

Symptom: DEAD, TOTALLY INOPERATIVE UNIT.

Subject: UNIT WON'T POWER UP WITH DC OR CCU.

Symptom: DEAD, TOTALLY INOPERATIVE UNIT.

Subject: Power will not stay on, DC or AC, contiually cycles between on and off.

Symptom: Camera will not stay on with AC or battery, camera contiuallyu cycles on and off

Subject: Intermittant power up on RMP210, 100m cable

Symptom: Intermittant power up on remote supply/controler.

Self Diagnosis Error Codes

Before you send or bring the camera to us for a repair: Your camcorder has a self-diagnosis display function. This condition displays your camcorders condition as a five digit code (combination of letters, numbers and figures) on the LCD screen display windows or on the view finder. If the five digit code is displayed. Check the error code chart, the last two digits indicated by □□ will differ depending on the state of your camcorder. If you are experiencing following error codes on your JVC camera or deck, most likely your camera or deck hardware has failed and needs an immediate attention. Call chat or email us to find a quick resolutions.

Technical/Service Bulletins


phoneIcon
(818) 244-4440
Toll Free: (800) 255-5045