Canon Camera most requested repairs

  • Sand salt water damage repair
  • SDI port physically damaged
  • SDI port physically not damaged however not working
  • Dropped / Abuse
  • Fire wire port not responding
  • Burned smell
  • Missing Pixels
  • Out of Sync
  • Iris blades stuck
  • Firmware upgrade 1.01 to 1.26 or higher
  • No Power
  • Iris blades stuck

Canon EOS DSLR Camera Repair


canon dslr repair

Most Common Repairs

Body
  • Lens dropped, parts replacement and adjustment
  • Sand, salt, water removal and adjustment
  • SDI port physically damaged
  • SDI port physically not damaged, however not working
  • Out of sync
  • Fire wire port not responding
  • No Power
  • Burned smell
  • LCD color quality bad
  • Missing Pixels
Lens
  • Out of focus, lens refurbishment (save hundreds)
  • Lens dropped, parts replacement and adjustment
  • Out of focus
  • Dust, debris, ocean salt, inside the lens
  • Replace scratched front element
Canon EOS DSLR models that we repair

  • Canon EOS 1D
  • Canon EOS 1Ds
  • Canon EOS 1D Mark II
  • Canon EOS 1D Mark II N
  • Canon EOS 1Ds Mark II
  • Canon EOS 1D Mark III
  • Canon EOS 5D Mark II
  • Canon EOS 5D
  • Canon EOS 7D
  • Canon EOS 30D
  • Canon EOS 40D
  • Canon EOS D60
Canon EOS DSLR error codes

  • (Err 99, Err 01) Lens communication or shutter mirror operation
  • (Err 02, Err CF or no CF) Bent or broken card reader pins/eject arm
  • (Err 05) flash will not pop open

Minor Service


Minor Repair and Service is usually performed at 250 hours or up to 500 hours depending on the environment the camera was used in such as dusty, sandy, windy, salty, etc. (example: shooting in the beach)


 Overall cleaning

 Transport cleaning

 Transport alignment

 Drum head Cleaning

 Tape path, tension, switching position adjustment

 Front lens cleaning

 EVF (viewfinder) cleaning

Major Service


Major repair and service is usually performed at 500 hours to 1000 hours. This includes minor service inspection, alignment, cleaning of most major and minor assemblies and necessary replacement of common wear parts.


 Drum head assembly

 Tape deck assembly

 Drum dass assembly

 Coaster (T) block assembly

 Pinch roller arm assembly

Self Diagnosis Error Codes


canon repair

Before you send or bring the camera to us for a repair: Your camcorder has a self-diagnosis display function.

This condition displays your camcorders condition as a five digit code (combination of letters, numbers and figures) on the LCD screen display windows or on the view finder. If the five digit code is displayed. Check the error code chart, the last two digits indicated by □□ will differ depending on the state of your camcorder.

Screen View


viewfinder LCD screen

Self Diagnosis Error Codes

Before you send or bring the camera to us for a repair: Your camcorder has a self-diagnosis display function. This condition displays your camcorders condition as a five digit code (combination of letters, numbers and figures) on the LCD screen display windows or on the view finder. If the five digit code is displayed. Check the error code chart, the last two digits indicated by □□ will differ depending on the state of your camcorder. If you are experiencing following error codes on your Canon Camera or Camcorder, most likely your camera or deck hardware has failed and needs an immediate attention. Call chat or email us to find a quick resolutions.

Technical/Service Bulletins


Canon Lens Repair
  • Canon 17-200
phoneIcon
(818) 244-4440
Toll Free: (800) 255-5045